Description KUT ROOFLEX is a flexible, elastomeric coating based on acrylic co-polymers and applied as a liquid it cures to form a durable, protective, waterproof membrane. It is applied by brush or roller to a thick highly durable coating. It can be used for concrete asbestos, wood, brick/stone, tiles, and textiles. It is a single-component emulsion containing inert pigments and has a brushable consistency. Uses KUT ROOFLEX is primarily used for the protection of roofs and is…
Description KUT DURACOAT 1000 R is a Bitumen based liquid applied polyurethane coating that cures in hours to form a tough elastomeric membrane that adheres to most substrates, forming a chemical and abrasion-resistant barrier for waterproofing, corrosion protection, and containment of water and most aqueous chemicals. Uses KUT DURACOAT 1000 R remains flexible and resilient and provides exceptional service in a broad range of applications. • Forms a tough elastomeric membrane able to…
KUT AQUA FILLPLUG is supplied as a ready to use dry powder requiring only the addition of water to produce a rapid setting and hardening mortar for plugging and stopping water leaking through the concrete. It is a blend of special cements, hydraulic cement and modifying agents to improve the bonding and waterproofing characteristics of this water plugging mortar. It is a product free of chlorides. It is engineered to have low exothermal characteristic…
Description KUT AQUA FLOWSTOP is supplied as a ready-to-use two-component product consisting of a dry powder mix (Part A) and a specially formulated liquid polymer (Part B). The dry powder (Part A) is a carefully designed blend of selected cement, finely graded sand fillers, non-metallic reinforcing fibers, water-reducing chemicals, Microsilica, auxiliary modifying agents, and surface active chemicals. The liquid polymer (Part B) consists of a blend of a unique new technology flexible…
Description KUT AOUAPROOF MEMBRANE is a two-component product consisting of Part “A” waterproofing powder and Part “B” a blend of liquid acrylic latex copolymers. Both products part “A:’ and Part “B” are mixed at the job site and applied with a brush or trowel. During the membrane application, fiberglass is embedded within the wet cementitious mix. Uses As a waterproof lining for water retaining structures/ swimming pools. • As a waterproof coating for sea-water structures. • As a…
Description KUT AQUA SHIELD is a two-component product consisting of Part “A” cementitious powder and Part “B” a blend of liquid acrylic latex copolymers. Both products Part “A” and Part “B” is mixed at the job site and applied with a brush, roller, or squeegee. During application, a fiberglass mat may be embedded within the wet cementitious mix to provide reinforcement Uses KUT AQUASHIELD allows expansion and contraction over a broad temperature range and maintains flexibility and…
Description KUT AQUASIL is available in two grades KUT AQUASIL SB is a solvent based and KUT AQUASIL WB is a water-based single-component penetrating oligomeric silane-siloxane system, ready to use which penetrates deep into porous substrates and then reacts to produce a bonded hydrophobic lining to the pores. KUT AQUASIL is colorless when the dry, non-staining, non-yellowing, and non-filming sealer is used to protect concrete and masonry surfaces without altering their appearance or the…
Description KUT EPOXY COATING “EWB” is a high performance water based epoxy paint, suitable for application to most surface. It can be used as a wearing, waterproof weatherproof surface. The facility to be applied to wet or dry surfaces combined with a wide variety of uses provides an almost limitless range of situations where it can be used. It is a two component material supplied in pre-weighed quantities ready for mixing and use. It is available as clear, matt and a limited range of…
Description KUT EPOXY COATING UW is a high performance solvent free epoxy resin based paint. It is a two component material supplied in pre weighed quantities, ready for mixing & use on site. The material can be applied directly to damp, wet or underwater concrete and to metal surface. One or two coat application depending upon the requirement is recommended with a minimum coating thickness of 150 microns. It is available in White, Sky Blue & Oxide Yellow colours. White and Sky…
Description KUT REMEDEX BASIC is a surface - applied material that waterproofs and protects concrete in-depth. It is used in conjunction with KUT REMEDEX PREMIUM for general waterproofing purposes or on its own when treating concrete blockwork. KUT REMEDEX BASIC consists of ordinary portland cement, specially treated quartz sand and fillers, and a chemically active compound. KUT REMEDEX BASIC is supplied in powder form and only needs the addition of water before application. Uses …
