KUT FLOOR COATING GP

Description

KUT FLOOR COATING GP is a two-component, multi-application epoxy-based flooring system. The standard version is available as a semi-glossy impervious finish in a range of colors KUT FLOOR COATING GP MT is a Matt (reduced gloss) version of the KUT FLOOR COATING GP. It is available in Light Grey color only. Other colors can be made on request if quantities justify the need. The cured film is hard and has excellent adhesion to concrete, sand/cement and granolithic screeds, and certain metal surfaces. KUT FLOOR COATING GP SF is a solvent-free version. This is available in Light Grey color and other colors on request. Irrespective of the version, the cured films of KUT FLOOR COATING GP are hard and have excellent adhesion to concrete, sand/cement, granolithic screeds, and certain metal surfaces. The standard version KUT FLOOR COATING GP is available in Brick Red, Oxide Yellow, Phirozi Blue, Light Grey, Dark Green, Dark Grey, and Clear. KUT FLOOR COATING GP CLEAR is an unpigmented version.

Uses

KUT FLOOR COATING GP is used in areas where high resistance to chemical attack is required and where it should be hard-wearing, easily cleaned attractive floor with good abrasion resistance which makes KUT FLOOR COATING GP suitable for both foot and vehicular traffic. Used in production assembly areas, workshops, dairies, hospitals, soft drinks production and bottling plants, kitchens, car showrooms, carparks, etc. Particularly suited for wet work areas or areas of strong chemical attack e.g. plating shops, chemical process plants, dye works, etc. • Certain areas where less shine is required KUT FLOOR COATING GP MT is used. • KUT FLOOR COATING GP SF is used where a thickness in the range of 0.5 to 0.8mm is required in two coats. • KUT FLOOR COATING GP CLEAR is suitable for application as a primer sealer and dust proofer. It can also be used on absorptive surfaces such as marble, absorptive natural stones, terrazzo, etc. to provide anti-staining properties. • Stair platforms, landings, and treads without finish covering shall be made “Non-slip” by using 1.2 kg of a fine abrasive aggregate for each m2 of area. Special aggregates having Aluminum Oxide containing> 70% can be supplied on request.