BONDING & CLEANING AGENTS

Description

KUT BOND EP is a multi-purpose adhesive based on solvent-free epoxy resins. It has exceptional adhesive properties and is supplied as a two-pack material which on mixing cures to high strength, oil, water, and chemical resisting surface.

Uses

It is designed as a bonding agent for fine and coarse aggregate, which must be clean and dry, to form a chemical-resistant mortar granolithic flooring or screed. It is recommended for use as an economical epoxy bonder for old to new freshly laid concrete or screed. It may also be used as a primer for epoxy floor coating, screeds, and bonding sprinkled on aggregate. It is used as a general-purpose bonding agent for common construction materials including concrete, ceramics, glass, metals, asbestos, timber, plastics, etc.

Description

KUT BOND PVA is a modified polyvinyl acetate emulsion formulated especially for use as a bonding aid with gauging water for plaster and cementitious mortars not exposed to dampness or water. It is the white, non-toxic, non-inflammable liquid of medium viscosity which dries to a transparent film.

Uses

Used for improving and bonding floor topping, cement renderings, and mortars, and repair of damaged and spalled concrete for dry exposure conditions. It is used as tile adhesive when mixed with cement and blended sands. It is recommended as a multi-purpose adhesive, a plaster bonding agent, a primer for overcoating bitumen with oil-based paints, for dust proofing floor screeds, and for friable concrete flooring.

Description

KUT FLEXI is a specially formulated liquid polymer emulsion recommended for use as an additive for thin bed mortars in installing tile, paver, brick, marble, and stone. These mortars are suitable for interior and exterior use over concrete as well as masonry-type surface. KUT FLEXI is suitable for applications that will be subject to continuous underwater immersion such as swimming pools, fountains, etc.

Uses

KUT FLEXI-based mortars are used for installing ceramic tiles, mosaic tiles, quarry tiles, natural stone, marble, terrazzo tiles, glass mosaic tiles, and thin bricks. These mortars are recommended for use over new and old concrete, masonry surfaces, gypsum plaster, concrete blocks, concrete screeds, gypsum wallboard, concrete plaster, calcium silicate blocks, and existing terrazzo tiles. It is recommended for use with KUT SUPERCOAT No.2, KUT TILE MORTAR, and some other KUT products.

Description

KUT SBR NO.1 is a highly concentrated styrene butadiene polymer emulsion modified with a blend of special auxiliary chemicals. KUT SBR NO.1 can be used for indoor as well as outdoor applications as the system is resistant to hydrolysis.

Uses

It is used as an integral adhesive and admixture to produce at the job site polymer modified cementitious mixes.  It is used in preparing thick tile bedding mortar.  It is recommended for use in bonding polystyrene panels with cementitious mortars.  It is used for general repair of damaged and spalled concrete. It also improves the qualities of the flooring screeds and increases the waterproofing and chemical resistance of cementitious mixes used as renders.  It is used as primer/sealer for cementitious repair products and cementitious floorings.

Description

KUT BOND PVA-MG is a modified polyvinyl acetate emulsion formulated especially for use as a bonding aid with gauging water for plaster and cementitious mortars not exposed to dampness or water. It is the white, non-toxic, non-inflammable liquid of medium viscosity which dries to a transparent film

Uses

Used for improving and bonding floor topping, cement renderings, and mortars, and repair of damaged and spalled concrete for dry exposure conditions. It is used as tile adhesive when mixed with cement and blended sands. It is recommended as a multi-purpose adhesive, a plaster bonding agent, a primer for overcoating bitumen with oil-based paints, for dust proofing floor screeds, and for friable concrete flooring.

Description

KUT POLYFIX - SBR is a water-resistant low viscosity SBR latex emulsion modified with auxiliary agents and is used to improve the water and chemical resistance of cementitious mixes made at the local job sites.

Uses

KUT POLYFIX - SBR is recommended for indoor as well as outdoor applications and wet areas such as toilets, bathrooms, etc.• It is used for preparing tile grouts, toppings, plaster and bonding slurries, grout joints, thick mortar beds for tiles, bricks, stone, ceramics, and marble, general reconstruction work, polymer concrete overlays for highways and bridges, patching and repair of precast concrete elements and concrete pipe.• KUT POLYFIX - SBR is used for the production of cementitious polymer flooring and is also recommended as supplied for dust proofing of floors.• It is used in preparing thick bed tiling mortar.