Description KUT BOND EP is a multi-purpose adhesive based on solvent-free epoxy resins. It has exceptional adhesive properties and is supplied as a two-pack material which on mixing cures to high strength, oil, water, and chemical resisting surface. Uses It is designed as a bonding agent for fine and coarse aggregate, which must be clean and dry, to form a chemical-resistant mortar granolithic flooring or screed. It is recommended for use as an economical epoxy bonder for old to new…
Description KUT BOND PVA is a modified polyvinyl acetate emulsion formulated especially for use as a bonding aid with gauging water for plaster and cementitious mortars not exposed to dampness or water. It is the white, non-toxic, non-inflammable liquid of medium viscosity which dries to a transparent film. Uses Used for improving and bonding floor topping, cement renderings, and mortars, and repair of damaged and spalled concrete for dry exposure conditions. It is used as tile…
Description KUT BOND TN is a specially formulated non–shrink, non-sag, solvent-free epoxy resin-based system blended with fine inert fillers. It is supplied as a two-component material in pre-weighed quantities ready for on-site mixing and use. Uses KUT BOND TN is primarily intended as a bonder for old concrete to new freshly laid as well as old concrete and cementitious repair products.
Description KUT EPOXY ANCHOR is available in two grades, “NS” and “P”. Both grades are three-component products consisting of Base, Hardener, and Filler supplied in pre-measured quantities ready for mixing and use. After hardening, the anchorages give consistent reproducible values. Both grades of KUT EPOXY ANCHOR can be used for all anchoring applications, having proper dimensions of hole diameters and bolt sizes and types. KUT EPOXYANCHOR “NS” is a “non-sag” material and is used in…
Description KUT EPOXYBONDER-“OTN” is a specially formulated epoxy resin-based system blended with fine Inert fillers. It is supplied as a two-component material in pre-weighed quantities ready for on-site mixing and use. Uses KUT EPOXYBONDER-” OTN” is primarily intended as a bonder for old concrete to new freshly laid concrete. It may also be used as a primer for placing KUT EPOXYMORTARS on dry as well as damp substrates.
Description KUT FLEXI is a specially formulated liquid polymer emulsion recommended for use as an additive for thin bed mortars in installing tile, paver, brick, marble, and stone. These mortars are suitable for interior and exterior use over concrete as well as masonry-type surface. KUT FLEXI is suitable for applications that will be subject to continuous underwater immersion such as swimming pools, fountains, etc. Uses KUT FLEXI-based mortars are used for installing ceramic…
Description KUT SBR NO.1 is a highly concentrated styrene butadiene polymer emulsion modified with a blend of special auxiliary chemicals. KUT SBR NO.1 can be used for indoor as well as outdoor applications as the system is resistant to hydrolysis.Uses It is used as an integral adhesive and admixture to produce at the job site polymer modified cementitious mixes. It is used in preparing thick tile bedding mortar. It is recommended for use in bonding polystyrene panels with…
Description KUT SBR NO.1 is a highly concentrated styrene butadiene polymer emulsion modified with a blend of special auxiliary chemicals. KUT SBR NO.1 can be used for indoor as well as outdoor applications as the system is resistant to hydrolysis. Uses It is used as an integral adhesive and admixture to produce at the job site polymer modified cementitious mixes. It is used in preparing thick tile bedding mortar. It is recommended for use in bonding polystyrene panels with…
Description KUT GEL EP is a thixotropic two component epoxy resin with exceptional adhesive and sealing characteristics. The base component is bluish White coloured and the hardner component is brownish yellow to facilitate ease of mixing.Uses It is designed for use as a surface sealant for crack injection systems. It is also used as bonding agent for common construction materials including asbestos, glass, timber and some plastics. It is also recommended for filling blowholes and…
Description KUT BOND PVA-MG is a modified polyvinyl acetate emulsion formulated especially for use as a bonding aid with gauging water for plaster and cementitious mortars not exposed to dampness or water. It is the white, non-toxic, non-inflammable liquid of medium viscosity which dries to a transparent film Uses Used for improving and bonding floor topping, cement renderings, and mortars, and repair of damaged and spalled concrete for dry exposure conditions. It is used as tile…
