Description KUT TILE GROUT is based on portland cement, selected sands, special polymers, workability agents, hydrophobic additives and shrinkage compensating agents. It is available in white and a limited range of colours, other colours for special bulk orders by arrangement. The powder is mixed with water to produce an easily worked mortar with good filling properties, allowing joints to be completely filled in one operation. The completely cured grouts is resistance to fungal growth ,…
Description KUT TILE ADHESIVE-EG is supplied as a ready to use one component white/grey powder requiring only the addition of water to produce a cohesive, sticky highly adhesive thin bed tile adhesive. KUT TILE ADHESIVE-EG powder is a blend of white & grey cement, selected fine sands, water reducing chemicals, special polymers, water retention agents to enhance workability and ease of application.Available in two colors-White and Grey.Uses KUT TILE ADHESIVE-EG white is recommended…
Description KUT GP GROUT is a pre-packed cementitious grout requiring only the addition of clean water to produce at the job site nonshrink multi-application grout. It is a special and unique blend of cements, microsilica, graded sands, water reducing agents and special auxiliary chemical to deliver expansion in the plastic state to compensate for shrinkage.KUT GP GROUT can be mixed in a range of consistencies in varying the amount of water used to produce a fluid to trowellable…
Description It is supplied as a ready to use powder which is a blend of cements, graded sand, microsilica and a blend of expansive agents. It requires only the addition of water to produce a high fluid - high strength non shrink grout. KUT FLOW GROUT is a unique product designed to give positive expansion in the plastic and early hardened states, producing a low porosity high durability material.Uses KUT FLOW GROUT with dual expansion properties is recommended for use in grouting heavy…
Description KUT EPOXY TILE GROUT is a solvent free epoxy resin blended with selected fine fillers. It is supplied as a three component system in pre-weighed quantities ready for on-site mixing and use. Two versions of KUT EPOXY TILE GROUT are available. 1. Normal: For working at normal temperatures. 2. Extended Pot life: For working in hot weather conditions above 35ºCUses KUT EPOXY TILE GROUT is a high performance epoxy grout with exceptional chemical resistance for bedding and…
Description It is supplied as a ready-to-use powder which is a blend of cement, graded sand, microsilica, and a blend of expansive agents. It requires only the addition of water to produce a high fluid ultra high strength non shrink grout. KUT SUPER GROUT is a unique product designed to give positive expansion in the plastic and early hardened states, producing a low porosity high durability material. Uses KUT SUPER GROUT with dual expansion properties is recommended for use in grouting…
Description KUT NON-SHRINK PUMPING GROUT is supplied as a ready-to-use powder requiring only the addition of water to produce a free-flowing grout. KUT NON-SHRINK PUMPING GROUT is a unique product designed to give positive expansion in the plastic and hardened states, producing a low porosity high durability material. It is a carefully designed very fine blend of portland cement modified with silica fume, water-reducing agents, and expansive agents. The product is formulated to produce…
Description KUT EPOXY GROUT NO.4 is 100% solid. three-component free flow, non-shrink epoxy grout formulated to provide easy placement. It provides high strength and creep resistance combined with the highest effective bearing area. Uses KUT EPOXY GROUT NO.4 is used for all grouting applications especially those requiring chemical resistance and heavy-duty resistance to vibrational and other dynamic or mobile loads. Applications include crane and transporter rails, compressors,…
KUT EPOXY AN 500 is a two-component, high strength adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The KUT EPOXY AN 500 is designed for bonding threaded rod and reinforcing bar hardware into drilled holes in concrete base and solid masonry materials. KUT EPOXY AN 500 Injection Cartridge 3:1 two components - Pure Epoxy resin styrene free - Available…
