Description KUT DURACOAT HTCR solvent-free Nontoxic system based on epoxy resins and curing agents specially selected for their ability to withstand chemical attacks & high temperatures. The system consists of a pre-weighed base and hardener components, all containing reactive elements essential to the system's installation. Uses KUT DURACOAT HTCR is a hard-wearing, chemical, and high-temperature resistance floor & wall coating that protects concrete and steel structures in…
Description A Multicomponent system, high solids polyurethane general purposes high-performance aliphatic PU coating. Offers excellent gloss and color retention and resistance to contaminants normally found in a car park/traffic deck situation. VOC compliant (350 – 380 g/l dependent on color) – 1990 EPA PF6/23(95). Uses KUT DURACOAT PU GP is used in areas where UV resistance is required and where it should be hard-wearing, easily cleaned attractive floor with good abrasion…
Description KUT DURAFLOOR EP 3D CLEAR is a high-performance epoxy clear coat specially formulated for 3D flooring. It is a two-component material supplied in pre-weighed quantities ready for mixing and use. Uses KUT DURAFLOOR EP 3D CLEAR is used as floor coating for providing a finish for pre-installed 3D films in indoor areas.
Description KUT DURAGUARD CP – I am a UV stable, multi-layered, durable, polyurethane deck coating system providing a seamless and protective, wear-resistant, profiled surface. It is pigmented, allowing improved aesthetics and the demarcation of pedestrian and traffic areas, for safety and improved traffic flow. KUT DURAGUARD CP – I have been tested for crack bridging by ASTM C836. It may consist of the following ASPEC products: • KUT DURAGUARD PRIMER – a high grade, low viscosity,…
Description KUT DURAGUARD CP - III is a UV-stable, polyurethane-based multi-component vehicle park decking system for exposed and intermediate traffic decks where crack bridging and waterproofing properties are required. KUT DURAGUARD CP - III has been tested for crack bridging by ASTM C836. • KUT DURAGUARD PRIMER – is a high grade, low viscosity, two-component epoxy resin primer, and substrate sealer. • KUT DURAGUARD MEMBRANE – is a two-component solvent-free polyurethane membrane…
Description KUT EMERY TOP is a pre-mixed ready-to-use dry powder consisting of selected and graded high-quality Emery aggregates, Portland cement, and special additives to impart the desired properties. The emery aggregate used is an extremely hard, chemically inert aggregate that resists polishing, therefore, providing a non-slip skid-resistant surface even when wet. Also being non-metallic it will not rust. The use of special additives reduces placing time by about 20% compared to…
Description KUT FLOOR COATING GP SF is a solvent-free system based on epoxy resins and curing agents specially selected for their ability to withstand chemical attacks. The system consists of a pre-weighed base and hardener components and color packs, all of which contain reactive elements that are essential to the installation of the system. A slip-resistant texture can be provided by the use of one of a range of KUT SILICA SAND or KUT SILICA QUARTZ which have been carefully graded to…
Description KUT FLOOR UNDERLAY is a blend of specially selected cements, graded aggregates, synthetic polymers .and workability aids. It is supplied as a dry powder requiring only, the addition of water to produce a smooth free flowing and self levelling smoothing coat, which can be laid to a feather edge. When thickness greater than 10mm are required, washed concrete sand can be added in equal proportions (if sand is added the product becomes trowellable and is no longer self…
Description KUT FLOOR SL is a two pack solvent free epoxy system consisting of base and hardner. Hard wearing aggregates for non-skid application and graded inert fillers for self leveling screed applications are provided separately for use in KUT FLOOR SL system. It can be applied from thickness of 1 mm upto 10mm depending on the procedure adopted. It is available in a range of colours. Colour range: The following colours are available: Brick Red, Oxide Yellow, Phirozi Blue, Light Grey,…
Description KUT FLOOR SEAL NO.1 is an aqueous solution of sodium silicate modified with wetting agents and other additives. The blended active ingredients chemically react with the free lime in the concrete producing hard insoluble salts sealing, dust proofing and hardening the floor surface in one operation.Uses KUT FLOOR SEAL NO.1 is a multi application concrete treatment for interior or exterior application. It can be used over new fresh or cured concrete and can be used over old…
