WATERPROOFING

Description

KUT ROOFLEX is a flexible, elastomeric coating based on acrylic co-polymers and applied as a liquid it cures to form a durable, protective, waterproof membrane. It is applied by brush or roller to a thick highly durable coating. It can be used for concrete asbestos, wood, brick/stone, tiles, and textiles. It is a single-component emulsion containing inert pigments and has a brushable consistency.

Uses

KUT ROOFLEX is primarily used for the protection of roofs and is designed for the protection of concrete structures against carbonation and chloride ingress. • The product is also suitable as a seamless and elastomeric waterproofing coating for timber, asbestos/fiber cement and zinc sheets, asphalt, built-up felt, and tiles. • It can also be used under terrazzo or tile floors, shower pans, kitchen, laundry, and bathroom floors.

Description

KUT DURACOAT 1000 R is a Bitumen based liquid applied polyurethane coating that cures in hours to form a tough elastomeric membrane that adheres to most substrates, forming a chemical and abrasion-resistant barrier for waterproofing, corrosion protection, and containment of water and most aqueous chemicals.

Uses

KUT DURACOAT 1000 R remains flexible and resilient and provides exceptional service in a broad range of applications. • Forms a tough elastomeric membrane able to bridge cracks and joints. • Impervious to water and most aqueous chemicals, providing a long-lasting tank and pond liner. • Asphalt extended urethane formula provides superior wear and weather ability for parking decks and containment areas. • Adheres to and bridges common construction materials such as concrete, steel, and other metals, asphalt pavement, glass, wood, and most coatings. • Environmentally sound, complying with the toughest VOC regulations. • Can be repaired when damaged. • Excellent abrasion resistance for severe wear applications. • UV stable. • Liquid, two-component urethane can be applied to complex shapes, multiple penetrations, or to most geotextiles.

KUT AQUA FILLPLUG is supplied as a ready to use dry 
powder requiring only the addition of water to produce 
a rapid setting and hardening mortar for plugging and 
stopping water leaking through the concrete.  
It is a blend of special cements, hydraulic cement and 
modifying agents to improve the bonding and waterproofing 
characteristics of this water plugging mortar. 
It is a product free of chlorides. It is engineered to have 
low exothermal characteristic than most similar competitive 
products available in the local market. 

Description

KUT AQUA FLOWSTOP is supplied as a ready-to-use two-component product consisting of a dry powder mix (Part A) and a specially formulated liquid polymer (Part B). The dry powder (Part A) is a carefully designed blend of selected cement, finely graded sand fillers, non-metallic reinforcing fibers, water-reducing chemicals, Microsilica, auxiliary modifying agents, and surface active chemicals. The liquid polymer (Part B) consists of a blend of a unique new technology flexible pure acrylic aqueous polymer modified with auxiliary chemicals to enhance brush ability, ease of application water repellency, and high resistance to the penetration of carbon dioxide and chloride ions.

Uses

As a waterproof lining for water retaining structures/ swimming pools. • As a waterproofing coating for sea-water structures. • As a waterproofing coating for concrete slabs (roofs, balconies, floors, kitchen floors, bathrooms under tiling, etc.) • As a protective coating for underground structural concrete. • As a backing of marble and granite to prevent surface staining. • As a protection for concrete surfaces from carbonation and chloride attack. • As a general-purpose thick coating to ensure water tightness of the structure. • As a coating for sewage treatment plants.

Description

KUT AOUAPROOF MEMBRANE is a two-component product consisting of Part “A” waterproofing powder and Part “B” a blend of liquid acrylic latex copolymers. Both products part “A:’ and Part “B” are mixed at the job site and applied with a brush or trowel. During the membrane application, fiberglass is embedded within the wet cementitious mix.

Uses

As a waterproof lining for water retaining structures/ swimming pools. • As a waterproof coating for sea-water structures. • As a waterproof coating for concrete slabs, roofs, balconies kitchens, and bathrooms under tiling floors. • As a coating for sewage treatment plants

Description

KUT AQUA SHIELD is a two-component product consisting of Part “A” cementitious powder and Part “B” a blend of liquid acrylic latex copolymers. Both products Part “A” and Part “B” is mixed at the job site and applied with a brush, roller, or squeegee. During application, a fiberglass mat may be embedded within the wet cementitious mix to provide reinforcement

Uses

KUT AQUASHIELD allows expansion and contraction over a broad temperature range and maintains flexibility and waterproofing properties under continuous exposure to water above or below grade. KUT AQUASHIELD has a thixotropic consistency and may be used on vertical as well as horizontal surfaces. KUT AQUASHIELD remains flexible from –35 to +90ºC. KUT AQUASHIELD waterproof membrane is intended for use wherever overflow water must be contained.

Description

KUT AQUASIL is available in two grades KUT AQUASIL SB is a solvent based and KUT AQUASIL WB is a water-based single-component penetrating oligomeric silane-siloxane system, ready to use which penetrates deep into porous substrates and then reacts to produce a bonded hydrophobic lining to the pores. KUT AQUASIL is colorless when the dry, non-staining, non-yellowing, and non-filming sealer is used to protect concrete and masonry surfaces without altering their appearance or the texture of the treated surface. KUT AQUASIL is breathable, nonflammable & has excellent resistance to weathering. Even though allowing passage of water vapor from the substrate significantly reduces the absorption of water and water-borne salts.

Uses

KUT AQUASIL protects atmospherically exposed reinforced concrete structures from attack by chloride ions and water intrusion. • It is also suitable to protect other cementitious substrates and masonry. • KUT AQUASIL is suitable for use on all types of structures, including those in marine environments. It is equally suitable for new and existing concrete structures. • KUT AQUASIL is used above grade, on vertical surfaces to minimize water penetration, reduce efflorescence, and aid in minimizing spalling due to freeze-thaw cycles. It also protects against ultraviolet degradation, airborne dirt, smog, industrial fumes, acid rain, and most other atmospheric chemicals. • KUT AQUASIL WB is formulated for use on various surfaces such as pre-cast, pre-stressed, exposed aggregate, poured-in-place, air-entrained concrete, granite, marble, and most commonly used building materials that readily absorb moisture. It is used as a sealer for pre-mixed decorative plasters & renders. It is used as a primer for emulsion paints & plasters, and silicone resin-based coatings & plasters. Being water-based the product meets all VOC requirements and is environmentally friendly.

Description

KUT EPOXY COATING “EWB” is a high performance water based epoxy paint, suitable for application to most surface. It can be used as a wearing, waterproof weatherproof surface. The facility to be applied to wet or dry surfaces combined with a wide variety of uses provides an almost limitless range of situations where it can be used. It is a two component material supplied in pre-weighed quantities ready for mixing and use. It is available as clear, matt and a limited range of colours. White and light colours tend to yellow.

Uses

KUT EPOXY COATING “EWB” is used as a wall and floor coating for waterproofing, dust proofing, and providing a decorative finish for brick, concrete and masonry surfaces in internal and external situations including marine environments. It can be applied to damp surfaces and acts as curing membrane when applied to fresh concrete. It helps prevent rising damp in floors and walls. Due to the non-toxic & anti bacterial nature of the cured films, it is recommended for use in food processing areas and as a tank lining for potable water and for fish farms. The clear grade is also used as a sealer for porous substrates such as concrete, masonry and gypsum boards.

Description

KUT EPOXY COATING UW is a high performance solvent free epoxy resin based paint. It is a two component material supplied in pre weighed quantities, ready for mixing & use on site. The material can be applied directly to damp, wet or underwater concrete and to metal surface. One or two coat application depending upon the requirement is recommended with a minimum coating thickness of 150 microns. It is available in White, Sky Blue & Oxide Yellow colours. White and Sky Blue will tend to Yellow. All other properties would remain unaffected.

Uses

KUT EXPOXY COATING UW is used as a corrosion coating for concrete or metal in applications where surfaces are either underwater or damp or are wet and cannot be dried out. It can be used for marine structures, basements, tunnels, docks and harbours, aqua ducts, dams, drilling rigs, sewage works and splash zone area applications

Description

KUT REMEDEX BASIC is a surface - applied material that waterproofs and protects concrete in-depth. It is used in conjunction with KUT REMEDEX PREMIUM for general waterproofing purposes or on its own when treating concrete blockwork. KUT REMEDEX BASIC consists of ordinary portland cement, specially treated quartz sand and fillers, and a chemically active compound. KUT REMEDEX BASIC is supplied in powder form and only needs the addition of water before application.

Uses

All concrete surfaces to be backfilled, basements, retaining walls, underground car parks, foundations, storage tanks, etc. (used in conjunction with KUT REMEDEX PREMIUM). Basement retaining walls in hollow concrete blockwork or lightweight concrete blockwork, (when used in conjunction with KUT REMEDEX PREMIUM and sand/cement render). Concrete blockwork walls above ground. KUT REMEDEX BASIC contributes to the waterproofing effect of KUT REMEDEX PREMIUM and provides additional protection where mechanical abrasion of the treated surface is likely, e.g. during backfilling. Used alone, KUT REMEDEX BASIC is a particularly suitable slurry for filling air bubbles and voids in weak and porous surfaces.