TILE GLUE AND GROUT

Now Shopping by

KUT TILE ADHESIVE-EG
As low as KWD 2.00

Description

KUT TILE ADHESIVE-EG is supplied as a ready to use one component white/grey powder requiring only the addition of water to produce a cohesive, sticky highly adhesive thin bed tile adhesive. KUT TILE ADHESIVE-EG powder is a blend of white & grey cement, selected fine sands, water reducing chemicals, special polymers, water retention agents to enhance workability and ease of application.Available in two colors-White and Grey.

Uses

KUT TILE ADHESIVE-EG white is recommended for following application:(i) Fixing ceramic tiles on walls and floors.(ii) Bonding quarry tiles direct on concrete or sand cement renderings and clean non-glazed old terrazzo tiles. (iii) Fixing tiles over timber and existing vinyl tiles if the surfaces are properly cleaned and primed with a brush coat of KUT FLEXIBOND. KUT TILE ADHESIVE-EG is specially recommended for fixing porous and white coloured tiles. However due care should be taken to ensure proper levels and that the thickness in such application does not exceed 12mm. Both grades of KUT TILE ADHESIVE-EG are suitable for interior as well as exterior conditions.