FLOORING & PROTECTIVE COATING

Description

KUT FLOOR COATING GP is a two-component, multi-application epoxy-based flooring system. The standard version is available as a semi-glossy impervious finish in a range of colors KUT FLOOR COATING GP MT is a Matt (reduced gloss) version of the KUT FLOOR COATING GP. It is available in Light Grey color only. Other colors can be made on request if quantities justify the need. The cured film is hard and has excellent adhesion to concrete, sand/cement and granolithic screeds, and certain metal surfaces. KUT FLOOR COATING GP SF is a solvent-free version. This is available in Light Grey color and other colors on request. Irrespective of the version, the cured films of KUT FLOOR COATING GP are hard and have excellent adhesion to concrete, sand/cement, granolithic screeds, and certain metal surfaces. The standard version KUT FLOOR COATING GP is available in Brick Red, Oxide Yellow, Phirozi Blue, Light Grey, Dark Green, Dark Grey, and Clear. KUT FLOOR COATING GP CLEAR is an unpigmented version.

Uses

KUT FLOOR COATING GP is used in areas where high resistance to chemical attack is required and where it should be hard-wearing, easily cleaned attractive floor with good abrasion resistance which makes KUT FLOOR COATING GP suitable for both foot and vehicular traffic. Used in production assembly areas, workshops, dairies, hospitals, soft drinks production and bottling plants, kitchens, car showrooms, carparks, etc. Particularly suited for wet work areas or areas of strong chemical attack e.g. plating shops, chemical process plants, dye works, etc. • Certain areas where less shine is required KUT FLOOR COATING GP MT is used. • KUT FLOOR COATING GP SF is used where a thickness in the range of 0.5 to 0.8mm is required in two coats. • KUT FLOOR COATING GP CLEAR is suitable for application as a primer sealer and dust proofer. It can also be used on absorptive surfaces such as marble, absorptive natural stones, terrazzo, etc. to provide anti-staining properties. • Stair platforms, landings, and treads without finish covering shall be made “Non-slip” by using 1.2 kg of a fine abrasive aggregate for each m2 of area. Special aggregates having Aluminum Oxide containing> 70% can be supplied on request.

Description

KUT FLOOR HD is a three-pack solvent-free epoxy resin system. It consists of an epoxy resin, modified amine hardener, and a filler that consists of specially graded and selected chemically inert aggregates. It is a trowel applied at a minimum of 5 mm thick. This thickness provides an impervious topping that is highly chemical resistant. The finished cured floor has a slightly granular texture of uniform self-colour. However, as the natural grade takes its color from the aggregate which is subject to variation, color matching is not practical with this grade. Color range: Natural and Light Grey.

Uses

KUT FLOOR HD provides a floor topping with exceptionally high strength and resistance to attack from mechanical wear and produces a safe non-slip finish. It is impervious and resistant to chemical spillage. It is ideally suited for Chemical handling and process areas, steelworks and heavy engineering plants, food and drink factories, dairies, oil refineries, paint workshops, battery rooms, and plating factories. Also widely used for areas of lighter duty where good, average durability and low maintenance costs are required. The surface of KUT FLOOR HD can be sealed with KUT FLOOR COATING GP, epoxy resin floor coating for easier cleaning in heavy-duty situations, or with KUT EPOXY COATING EWB or KUT EPOXY COATING UW in food and drinks processing areas.

Description

KUT FLOW TOP is a two-component polymer modified cementitious material designed for use as a floor topping at a thickness of feather edge to 15mm. It is formulated to incorporate the state of the art latex technology which provides excellent traffic durability. KUT FLOW TOP is placed at a self-leveling consistency and is also suitable as an underlayment in dry, moist, or wet areas.

Uses

KUT FLOW TOP may be applied over any sound interior concrete surface. It is used for leveling surfaces and repair of old worn concrete. Typical applications include floor repairs, warehouses, manufacturing facilities, rehabilitation, docks, and office floors.

Description

KUT SHAKETOP is a cementitious premixed shake-on floor hardener based on specially selected and graded silica aggregate and is ready to use. It is evenly sprinkled on fresh concrete and floated to a smooth finish. It provides increased wear resistance to the surface.

Uses

KUT SHAKETOP is used to produce abrasion-resistant monolithic floor topping for surfacing concrete in: • Lobbies • Restaurants • Showrooms • Factory and warehouse floors • Commercial and Industrial facilities • Carparks, etc.